HISHINE®Sella-I-20C歯科シール機·オートクレーブ滅菌シーラー

HISHINE®Sella-I-20C歯科シール機·オートクレーブ滅菌シーラー

説明：

●実用的な、絶妙なデザインで、食品、医薬品などに適用される。

●耐久性のある銅製トランス品質はより安定。

●高品質のシリコーンゴム、高い耐熱性、より良い効果的なシーリングを確実にする。

●手を保護するために事故に切断設計されている。

仕様

Notes

1. Keep the sealing platform always clean. The accumulation of waste on the sealing area will reduce the life cycle of the resistance and the insulating material. For an effective cleaning, wait for the sealing area to cool down and use a cloth slightly moistened with alcohol.
2. If the insulating material lower tape is worn the sealer may go faulty and the resistance may be damaged. Being so, every time the resistance is replaced, please also check the insulating material tape and replace it if it is worn.
3. If it is necessary to replace the resistance or the fuse, use only those which have the same specifications as the genuine parts’.
4. While packing the instruments protect the ones which have cutting and piercing tips with cotton or gauze to avoid the packages rupture.
5. Place the sealed envelopes with instruments into the autoclave. Check the instructions from the manufacturer of your autoclave regarding the arrangement of the packages and the sterilization cycle. 6. Replace the balde after cutting around 800 times. Use pliers to take out the obtuse one, replace the new blade.
7. Replace heat-resisting fabric after sealing about 500 times or inefficient seal. Extract the silicon tube, peel off the heat-resisting fabric, replace the new one, and inset the silicon tube at original position.